Intelligent double pendulum handheld welding head (single wire feed five-in-one) FWH20-DS50A
Intelligent double pendulum handheld welding head (single wire feed five-in-one) FWH20-DS50A
常规价格
$1,451.00 USD
常规价格
促销价
$1,451.00 USD
单价
/
单价
智能双摆手持焊头(单送丝五合一)FWH20-DS50A
型号:FWH20-DS50A
光纤接口:QBH
波长范围:1070±20nm
额定功率:≤3000W
准直焦距:50mm
聚焦焦距:150mm
焦距调节范围:-10mm~+10mm
光斑调节范围:0~5mm
辅助气压:≥0.1-1Mpa
有效通光孔径:16mm
智能保护功能:有
重量:0.72Kg
区别:
1.功能区别:二合一一(焊接、切割)、
功能差异:五合一(焊接、切割、定期清理、焊缝清理、储能焊接) 2、配件差异:在二合一的基础上,五合一是新增(清洁组件F600套件、喷嘴焊缝清洁、DS50A储能焊接调焦组件)
附件清单 1
智能双摆手持焊头 1套
24V电源盒 1个
接地夹组件 1个
7寸显示屏 1个
触摸屏 4-芯线-1.5m-黑色 1 件
手持式激光焊接系统 V2 1 件
送丝嘴精品盒套装 1 件
清洁调焦组件 F600(含镜头) 1 件
清洁防护罩组件 1 件
喷嘴焊缝清洁 1 件
DS50A 储能焊接调焦组件套装
附件清单 2
送丝机 1 件
送丝轮 2 件
送丝管组件 1 件
电源插头线组件 1
件 送丝信号控制线 1条
More materials: Suitable for high-speed welding of aluminum, steel, copper, titanium, nickel alloy and other materials and thicknesses.
Simple: Optimized presets shorten the learning curve. Half an hour to 2 hours, from beginner to expert.
About the welding function of laser welding machine
Dual Wobble Welding: With 7 modes to choose from, wobble welding control allows for 8mm of additional weld width.
Low Heat: Low heat input to minimize part deformation or deformation.
About the weld cleaning function of laser welding machine
Adjustable cleaning width up to 15 mm at a time.
Create visually appealing welds while eliminating the need for post-sanding.
Specially designed welding and cleaning nozzle heads are available for any joint configuration.
Dramatically reduce time, cost and scrap
About the cleaning function of laser welding machine
Swing function provides an adjustable cleaning scan width of up to 15 mm in cleaning mode
Six cleaning modes are available, suitable for different scenarios. The cleaning mark is smaller than that of a single swing.
Specially designed cleaning nozzle equipped with F800 cleaning lens to improve cleaning efficiency
About the cutting function of laser welding machine
Can cut aluminum, stainless steel, carbon steel and other types of metals.
Disconnect the wire feeder and select a swing width of 0.1mm in welding mode to start cutting.
Cutting thickness up to 3mm.
型号:FWH20-DS50A
光纤接口:QBH
波长范围:1070±20nm
额定功率:≤3000W
准直焦距:50mm
聚焦焦距:150mm
焦距调节范围:-10mm~+10mm
光斑调节范围:0~5mm
辅助气压:≥0.1-1Mpa
有效通光孔径:16mm
智能保护功能:有
重量:0.72Kg
区别:
1.功能区别:二合一一(焊接、切割)、
功能差异:五合一(焊接、切割、定期清理、焊缝清理、储能焊接) 2、配件差异:在二合一的基础上,五合一是新增(清洁组件F600套件、喷嘴焊缝清洁、DS50A储能焊接调焦组件)
附件清单 1
智能双摆手持焊头 1套
24V电源盒 1个
接地夹组件 1个
7寸显示屏 1个
触摸屏 4-芯线-1.5m-黑色 1 件
手持式激光焊接系统 V2 1 件
送丝嘴精品盒套装 1 件
清洁调焦组件 F600(含镜头) 1 件
清洁防护罩组件 1 件
喷嘴焊缝清洁 1 件
DS50A 储能焊接调焦组件套装
附件清单 2
送丝机 1 件
送丝轮 2 件
送丝管组件 1 件
电源插头线组件 1
件 送丝信号控制线 1条
More materials: Suitable for high-speed welding of aluminum, steel, copper, titanium, nickel alloy and other materials and thicknesses.
Simple: Optimized presets shorten the learning curve. Half an hour to 2 hours, from beginner to expert.
About the welding function of laser welding machine
Dual Wobble Welding: With 7 modes to choose from, wobble welding control allows for 8mm of additional weld width.
Low Heat: Low heat input to minimize part deformation or deformation.
About the weld cleaning function of laser welding machine
Adjustable cleaning width up to 15 mm at a time.
Create visually appealing welds while eliminating the need for post-sanding.
Specially designed welding and cleaning nozzle heads are available for any joint configuration.
Dramatically reduce time, cost and scrap
About the cleaning function of laser welding machine
Swing function provides an adjustable cleaning scan width of up to 15 mm in cleaning mode
Six cleaning modes are available, suitable for different scenarios. The cleaning mark is smaller than that of a single swing.
Specially designed cleaning nozzle equipped with F800 cleaning lens to improve cleaning efficiency
About the cutting function of laser welding machine
Can cut aluminum, stainless steel, carbon steel and other types of metals.
Disconnect the wire feeder and select a swing width of 0.1mm in welding mode to start cutting.
Cutting thickness up to 3mm.