Laser head lens collimation lens focusing lens reflective lens X-axis reflective lens Y-axis reflective lens protective lens

Lens specifications
Collimating lens: D20*F50
Focusing lens: D20*F150
Focusing lens: D20*F600
Focusing lens: D30*F600
X-axis reflective lens: 16.2*15.2*1.6
Y-axis reflective lens: 15.2*15.2*1.6
Reflective lens: 27*14*2
Protective lens: D20*2
Protective lens: D30*2

Lens cleaning steps
1. Wash your hands and blow dry or wait to dry;
2. Put on finger cots;
3. Gently take out the lens for inspection;
4. First use a balloon or balloon to blow off the dirt on the surface of the lens;
5. Soak a cotton ball in lens fluid.
6. Dilute the lens cleaning solution with lens tissue and wipe gently. Remember to wipe in a rotating motion; 7.
Replace the lens wiper and repeat the steps. Do not reuse the same lens wipe. 8
, Use balloons to blow the mirror clean.

Lens care taboos
1. Do not touch the mirror surface with your hands;
2. Do not blow air into the lens or use air generated by an air generator;
3. Do not let the lens directly contact the fixed surface;
4. Do not use non-lens wiping paper (stick) to wipe or wipe the lens with force;
5. Please do not wipe hard when sensing the lens.

Lens precautions
1. Please be sure to wear finger cots or rubber gloves when handling lenses to avoid hand injuries and oil stains.
May stain lenses and cause performance degradation;
2. Do not use clips or any other tools to pick up the lenses;
3. Do not place the lens on the lens paper or damage the lens;
4. Do not place the lens on a rough or solid surface, otherwise the infrared lens will be easily scratched;
5. Do not clean or touch the surface of pure gold or pure copper.